LG & Samsung Washing Machine Codes in Korea: CL, OE, 4C & 5C Explained

Washing machine error codes in Korea shown on an LG control panel

Written by

in

On a Korean LG or Samsung washing machine, CL means the buttons are locked, not that the machine is broken. OE (LG) and 5C/5E (Samsung) point to a drainage problem, and 4C/4E (Samsung) points to a water supply problem. Find your code in the table below to see what it means and what to check first.

This guide is based on LG Electronics and Samsung Electronics Service official support pages (in Korean) for machines sold in Korea. Overseas models and your own model may differ, so check your manual. Pages checked on November 6, 2026.

Washing Machine Error Codes in Korea at a Glance

Brand Code What it means Check first
LG CL Child lock (button lock). LG describes it as a normal notice The lock symbol or 버튼잠금 mark and the button combination for your model
LG OE Water is not draining Drain filter, drain hose, floor drain (drum model)
Samsung 4C / 4E Water is not coming in, or not filling in time Tap and hose connection, hose kinks, inlet valve mesh
Samsung 5C / 5E (SC / SE) Water is not draining Drain filter (if equipped), drain hose, floor drain

LG CL: The Child Lock Is On

LG says CL means the child lock is set and the buttons are locked. On the drum models described in LG’s guide, nothing except the power button works while it is locked, and the lock does not release by itself when the cycle ends. On some LCD dial Objet models, the power and Extra Functions (부가기능) buttons still work. Which buttons release the lock depends on the panel. Look for a lock symbol or “버튼잠금” (button lock) next to two buttons.

Drum model type How LG says to release it
Lock symbol Hold Wash (세탁) + Rinse (헹굼) for 3 seconds or more
[*버튼잠금] mark Hold Spin (탈수) + Water Temp (물온도) for 3 seconds or more
LED Objet model Hold Remote Control (원격제어) for 3 seconds or more
LCD dial Objet model Press Extra Functions (부가기능), then turn the dial to switch Button Lock on/off
LED Washtower Hold the Spin (탈수) button on the washer panel for 3 seconds or more
LCD Washtower (newer) Touch the screen once, then long-touch the large lock icon for 3 seconds or more

Top-loaders are different. LG’s pages give 3 seconds or 7 seconds in one guide and 5 seconds or 7 seconds in another, depending on the model and the panel. Do not assume one time works for every top-loader. Check the panel marking and your manual.

On the top-load models covered by LG’s door guide, when the door is locked and CL is also on, the door may not open and the Start/Pause button may not work. A red key symbol is a different thing: LG says it means the door is locked for safety while the machine is running. Pause it, wait until the drum has completely stopped and the key symbol is gone, then open the door.

LG OE: Water Is Not Draining

For LG drum washers, LG lists three causes: a clogged drain filter (the pump mesh), a drain hose that is bent, pressed or too high, and a blocked floor drain. In winter, LG also lists a frozen pump or hose. For general cold-weather pipe precautions, see our winter pipe prevention checklist. For washer-specific thawing instructions, follow LG’s guide for your model.

  • Check the drain hose. On drum models, LG says to straighten it and keep it no higher than 50 cm from the floor.
  • Check the drain filter. LG’s drum page explains how to drain the leftover water and clean the filter. Follow that procedure for your model.
  • Check the floor drain. LG says that if water comes out well from the hose during a Spin-only run with the hose off the drain, the problem is the drain, not the machine.
  • If it may be frozen, LG’s drum page gives a thawing method using warm water (50–60°C), following LG’s model-specific instructions. Never pour boiling water: LG warns it can deform or damage parts.
  • If the error stays, contact LG service.

For LG top-load washers, LG’s separate OE guide lists a blocked, bent, pressed, or frozen drain hose as possible causes. It also explains how to check whether the floor drain is blocked. If it may be frozen, LG gives a thawing method using warm (50 to 60°C) water and a warm towel. Never pour boiling water. Follow the instructions for your exact model.

Samsung 4C / 4E: Water Is Not Coming In

Samsung says 4C/4E shows when no water comes in, or when the needed amount does not fill within the set time.

  • Check the tap and the coupler/hose connection to see if water flows normally.
  • Check the inlet hose. After a move, it can be bent or pressed.
  • Check the water inlet valve mesh filter. Sediment or scale can reduce or block the water. Samsung’s page starts with unplugging the machine and closing the tap, and gives the cleaning steps for your model.
  • Check that the cold and hot hoses are not swapped. Samsung says a swap can bring hot water into the final rinse and damage clothes.

Samsung 5C / 5E (SC / SE): Water Is Not Draining

Samsung says these codes show when water drains slowly, partly, or not at all. The main causes are the drain filter or drain hose, either installed badly or blocked. If the filter check does not fix it, internal parts such as the drain pump may need inspection. Sheet-type detergent or fabric softener that does not dissolve can catch in the door gasket or drain filter and block drainage.

  • If your model has a drain filter, check it using Samsung’s instructions. Some models do not have one.
  • Check the drain hose for twists or pressing. If you use an extension hose, it should run level, and the hose end should not sit in water.
  • Check the floor drain. If it is blocked, clear it first. In winter, freezing can be the cause.
  • If none of this works, book a service visit.

When to Call Service, and What to Say

Contact service if the code stays after you have checked the items above, or if a lock will not release with the right button combination. Samsung customer service: 1588-3366. LG customer service: 1544-7777 (weekdays 09:00 to 18:00). LG notes that out-of-warranty inspections may be charged.

Have ready: the model name (on the label), the code on the display, what you already checked, and when it started.

English Korean
The washing machine shows CL. 세탁기에 CL이 떠요.
The machine shows OE and water won’t drain. 세탁기에 OE가 뜨고 물이 안 빠져요.
The machine shows 4C and no water comes in. 세탁기에 4C가 뜨고 물이 안 들어와요.
The machine shows 5C and water won’t drain. 세탁기에 5C가 뜨고 물이 안 빠져요.
The model name is … 세탁기 모델명은 …입니다.

FAQ

Is CL a fault code?

No. LG says it means the child lock is on.

Does turning the power off and on clear CL?

LG’s touch-type drum page says the lock stays on after a power cycle. Use the button combination for your model.

Does CL release when the wash ends?

On LG drum machines, it does not release automatically.

How long do I hold the buttons on a top-loader?

It depends on the model: 3, 5 or 7 seconds, according to LG’s pages. Check your panel and manual.

What is the difference between 4C and 5C?

On Samsung, 4C/4E is a water supply problem and 5C/5E is a drainage problem.

Sources and References

Compiled on November 6, 2026 from the pages above. Controls vary by model.

Photo by Jeroen Overschie on Unsplash