Korean Boiler Away Mode (외출): What It Actually Does

Wall thermostat controller

Written by

in

외출 (oechul) means “going out” or “away” in Korean.

On a Korean boiler controller, Away Mode (외출) changes how heating operates while you’re away. However, the exact operation depends on the model.

Some boilers stop normal room heating but retain hot water and freeze protection. Others run minimal heating at regular intervals. Do not assume Away Mode keeps every apartment at a low, comfortable temperature.

What Does the 외출 Button Actually Do?

The 외출 button appears on many Korean boiler controllers, including models from Navien and Rinnai.

The function is not identical across all models.

Boiler controller What Away Mode does
Navien NR-60E Stops normal room heating while retaining hot water and freeze-protection functions.
Rinnai R331SN Runs minimal heating at four-hour intervals to help maintain warmth indoors.
Rinnai RUB8200 Repeats minimal heating at four-hour intervals.

These are model-specific examples. Check your wall controller’s model number before changing any settings.

For an explanation of other Korean heating controls, see How to Use Korean Ondol Floor Heating: The Boiler Panel Explained.

How to Turn Away Mode On and Off

The button sequence depends on your controller. The following steps come from the manufacturers’ operating instructions.

Navien NR-60E

  1. Press 외출 (Away).
  2. Check that the Away indicator appears on the display.
  3. To return to normal heating, press 실내/온돌 (Room/Ondol).

According to the NR-60E manual, Away Mode retains hot-water and freeze-protection functions without providing normal room heating.

This means the floor may become cold while Away Mode is active.

Rinnai R331SN

  1. Turn on the controller.
  2. Rotate the heating temperature dial to 외출 (Away).
  3. Check that Lo appears on the display.
  4. To exit Away Mode, turn the dial to a normal heating position.

The R331SN manual states that the boiler repeats minimal heating at four-hour intervals.

You can also exit Away Mode by turning the dial to 꺼짐 (Off), but this does not restore normal heating.

Rinnai RUB8200

  1. Press the 외출 (Away) button.
  2. Check that the Away indicator appears on the display.
  3. To exit, press the Away or heating button.

The RUB8200 manual also describes minimal heating at four-hour intervals.

Important: These steps apply to the named controllers. Other models may use different buttons, indicators, or operating cycles.

Should You Use Away Mode When Leaving Home?

There is no single setting that works best for every apartment.

The right choice depends on your boiler model, outdoor temperature, insulation, and the length of your absence.

Leaving for a Short Time

During freezing weather, you may not need to activate Away Mode every time you leave briefly.

Kiturami’s January 2026 winter guidance recommends reducing the indoor heating temperature rather than completely turning off the boiler during cold weather.

This recommendation should not be treated as a universal button-setting instruction for every brand.

Leaving for Several Hours

Away Mode may be appropriate when your controller’s manual recommends it for temporary absences.

For example:

  • Rinnai R331SN: Periodic minimal heating operates at four-hour intervals.
  • Navien NR-60E: Normal room heating stops, while hot water and freeze protection remain available.

The difference matters in very cold weather.

If you’re unsure what happens after pressing 외출, check the manual or ask your landlord before relying on the setting.

Leaving for Several Days

Winter travel requires more than selecting a button.

Before leaving:

  • Check the manufacturer’s instructions for long absences.
  • Keep electrical power connected where required for freeze protection.
  • Follow the manufacturer’s guidance on gas and heating-system valves.
  • Check exposed plumbing and pipe insulation.
  • Ask your landlord or building management about any building-specific precautions.

Kiturami explains that its freeze-protection system cannot operate without electrical power.

Its January 2026 guidance also recommends maintaining pipe insulation and reducing the normal indoor temperature setting rather than completely switching off the boiler during a cold spell.

For more winter precautions, see Frozen Pipes in Korea: No Water or Heat? What to Do.

Away Mode vs. Turning the Heating Off

Several settings on a Korean boiler controller can look similar.

Korean setting Meaning
외출 Away Mode. Operation varies by model.
실내 Room-temperature heating mode.
온돌 Underfloor heating mode, often based on heating-water temperature.
온수전용 Hot-water-only mode on supported controllers.
전원 Power control. Its effect depends on the appliance and controller.

On the Navien NR-60E, 온수전용 (Hot Water Only) allows hot-water use without normal room heating.

Its Away Mode also retains hot water and freeze protection.

However, turning off room heating is not the same as unplugging the boiler.

In freezing weather, do not disconnect the boiler from its electrical supply unless the manufacturer’s instructions specifically require it.

Does Away Mode Save Gas?

It can, but savings are not guaranteed.

Rinnai describes the R331SN’s Away Mode as a way to reduce unnecessary heating during an absence.

Actual gas consumption depends on several factors:

  • Boiler model and Away Mode operation
  • Outdoor temperature
  • Building insulation
  • Heating settings before and after your absence
  • How long the apartment is unoccupied

In a poorly insulated apartment, the heating required after returning may affect the overall result.

There is no single Away Mode setting that guarantees the lowest gas bill in every home.

What If the Floor Stays Cold After You Return?

If the floor isn’t warming up, start by checking the wall controller.

  1. Exit Away Mode. Select your normal room or ondol heating setting.
  2. Check the target temperature. Make sure heating is being requested.
  3. Look for an error code. A warning indicator may point to a separate problem.
  4. Allow time for the floor to warm. Underfloor heating responds gradually.
  5. Ask for assistance if the heating still does not work.

If the controller is completely unresponsive, see Boiler Won’t Turn On in Korea: What to Check Before Calling Service.

Do not open the boiler or attempt internal repairs yourself.

If you smell gas, stop using the appliance. Avoid flames and electrical switches, leave the affected area, and contact the appropriate emergency service or gas supplier from a safe location.

Does Hot Water Still Work in Away Mode?

For the Navien NR-60E, yes.

The manufacturer’s manual specifically states that hot-water operation remains available while Away Mode is active.

However, this does not prove that every Korean boiler operates the same way.

Check the 외출, 온수, or 온수전용 sections of your model’s manual if hot-water availability matters while you’re away.

Before You Leave: Quick Checklist

  • Identify the boiler or wall-controller model.
  • Check how its Away Mode actually operates.
  • Choose a setting appropriate for the weather and length of your absence.
  • Keep the required electrical and utility supplies available for freeze protection.
  • Inspect exposed pipes and insulation during winter.

The key point: 외출 means Away Mode, but it does not always mean continuous low-temperature heating.

The most appropriate setting is the one supported by your model’s instructions and your home’s winter conditions.

Official Sources

Manufacturer information checked on November 13, 2026. Always follow the instructions for your exact boiler and controller model.

Photo by Dan LeFebvre on Unsplash